oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 821-sl115.0m-17a 115.0 mhz if saw filter 17.08 mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o smith chart o vswr notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 821-sl115.0m-17a january 2011 rev a 115.0 mhz if saw filter 17.08 mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description a, b, c, d, f, g, h, i ground j input e output test fixture & values input l1 = 47 nh, c1 = 62 pf output l2 = 33 nh, c2 = 56 pf source/load impedance 50 ?
oscilent part number 821-sl115.0m-17a january 2011 rev a 115.0 mhz if saw filter 17.08 mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -5 - 70 storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz - 115.0 - insertion loss at fo db - 13.0 15.0 group delay variation at fo 7.5 mhz nsec - 43 80 absolute delay at fo usec - 0.99 - passband ripple variation at fo 7.5mhz db - 0.42 1.00 bandwidth at -1db mhz 16.80 17.08 - bandwidth at -3db mhz - 17.84 - bandwidth at -40db mhz - 20.82 21.30 ultimate rejection db 40 47 - temperature coefficient ppm/c - -86 -
oscilent part number 821-sl115.0m-17a january 2011 rev a 115.0 mhz if saw filter 17.08 mhz bandwidth product specification p. 3 www.oscilent.com frequency response bandwidth at ?1.0 db bandwidth at ?3.0 db bandwidth at ?40.0 db wide-band
oscilent part number 821-sl115.0m-17a january 2011 rev a 115.0 mhz if saw filter 17.08 mhz bandwidth product specification p. 4 www.oscilent.com ripple variation fo7.50 mhz group delay variation fo7.50mhz smith chart
oscilent part number 821-sl115.0m-17a january 2011 rev a 115.0 mhz if saw filter 17.08 mhz bandwidth product specification p. 5 www.oscilent.com vswr
|